Bauerfeind GenuTrain S Pro Knee Brace
Details Bauerfeind GenuTrain S Pro Knee Brace
About the Bauerfeind GenuTrain S Pro knee brace
The Bauerfeind GenuTrain S Pro is a stabilising knee brace for mild to moderate knee instability. Anatomically shaped hinges on both sides guide the knee joint, while adjustable straps around the upper and lower leg provide a firm fit.
The hinges can limit knee flexion and extension independently. This allows movement freedom to be tailored to your rehabilitation programme and helps prevent unwanted or painful movements.
Size chart
Measure the circumference of the upper leg 14 cm above the centre of the knee and the circumference of the lower leg 12 cm below the centre of the knee. Keep the knee bent at approximately 30 degrees whilst measuring. Both measurements must fall within the same size.
| Size | Upper circumference | Lower circumference |
| 1 | 38 - 41 cm | 28 - 31 cm |
| 2 | 41 - 44 cm | 31 - 34 cm |
| 3 | 44 - 47 cm | 34 - 37 cm |
| 4 | 47 - 50 cm | 37 - 40 cm |
| 5 | 50 - 53 cm | 40 - 43 cm |
| 6 | 53 - 56 cm | 43 - 46 cm |
| 7 | 56 - 59 cm | 46 - 49 cm |
What conditions is the knee brace suitable for?
The GenuTrain S Pro can be used when a standard compression knee support provides insufficient stability. The knee brace is suitable for, among other things:
- Mild to moderate instability of the knee joint.
- Gonarthrosis, or knee wear and tear.
- Arthritis, including rheumatoid arthritis.
- Meniscus injury.
Use the brace for serious injury or marked instability according to the advice of a doctor, physiotherapist or other healthcare practitioner.
Adjustable hinges
Knee flexion and extension can be limited independently of each other. Flexion can be set to 30, 60 or 90 degrees and extension to 20 degrees. Ideally, have these settings determined by a qualified practitioner.
The hinges are thermoplastic and can be adjusted. This allows a specialist to fit them more precisely to the shape of your leg.
Support and comfort
A visco-elastic patellar pad surrounds the kneecap and provides gentle massage during movement. The elastic knit fabric provides compression and can help activate and coordinate the stabilising leg muscles.
The breathable and skin-friendly material fits closely around the knee. The extra soft knee hollow provides space to flex and extend comfortably. Pull handles on both sides make it easier to put the brace on properly.
How to use the knee brace
Pull the brace over your leg using the pull handles. Position the patellar pad around the kneecap and check that the hinges lie properly on both sides of the knee joint. Then fasten the straps around the upper and lower leg and adjust them firmly but comfortably.
Frequently asked questions
What is the difference from a standard knee support?
The GenuTrain S Pro has adjustable hinges and an adjustable strap system. This gives the brace greater mechanical stability and allows movement freedom to be restricted.
Does the GenuTrain S Pro have real hinges?
Yes. The brace has anatomically shaped hinges on both sides that guide the knee and can limit flexion and extension.
Who should set the movement restriction?
Ideally, have the settings determined by a doctor, physiotherapist or orthopaedic specialist so they align with your rehabilitation programme.